In today?s changing environment, creation of projects by organizations has become more common. The problem is, though, that the knowledge of the subject is still limited which causes many projects to fail. This has made it extra important to have a good project manager whocanlead the project in the right direction. While doing this both the Project method and the project manager?s motivation are contributing sources.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

Http : // en.wikipedia.org / wiki / Life is a book with a life of its own. It is made to raise questions about the importance of the book, and the paper book in particular. It is a design project in which a new design method is being tested and evaluated. The intention of the project is to determine whether a concept can be found and evolved from a chosen subject or not. The aim of the book project is also to investigate if the form and content of the book could be entwined, making it impossible to separate them from each other..

This project in an in depth exploration about the basics of creating space in the form of an experimental investigation using my own perceptions as reference. Within a method, especially outlined for the project using descriptive words of opposites, my interpretation of the words has been formed into models of rooms. Four workshops with restrictions and rules acted as a platform for the striving towards the aim of a wider understanding of how space can be experienced. Through analysis I have formulated the different parameters influencing space itself and my perceptions of it. During the project a language for visualizing the interpretations of a room has been further evolved.

This project has been made in cooperation with Stora Enso Research Centre Falun (Research). Thebackground of the project is that Research has customers who demand a method to measure the quantityof varnish online in offset printing. The aim with the project is to investigate if any test method correlateswith the quantity of varnish and to improve the understanding of the variables in the varnishingunit. The goal with the project is to develop a functional method. Two printing trials have beenperformed.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

This study is about an ongoing project in the northern parts of Sweden. Quattro Helix is used as a model for the interaction between four institutional members of the society, in purpose of challenging existing social structures and achieveing community development. The aim is to increase the knowledge about Quattro Helix-model as an approaching method to face the problems in the society through cooperation between Civil society, state, academy and industry. Interviews with eight project members were used as the data-collecting method to capture the perceptions about the project constellations. Information was gathered from two representatives from each of the four actors.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

Background: The project controller is a function witch evolved due to the strong gaining ground of project operation. Why the area of the project controller is interesting to study is explained by the fact that increasing knowledge of this function is important in order to make project operation work well. The fact that opinions in this field disagree, further increases the interest of the field. In order to study the function of the project controller three companies have been singled out. They are IFS, Intentia and Saab Bofors Dynamics.

Course: Master's Thesis in Business AdministrationPurpose: The purpose with this paper is to give an insight, and to compare, the project management of two IT-projects ? one which product was implemented and put into use, and one, which was implemented but no longer exists on the market. Furthermore also examine the critical success factors that influence the success respectively the failure of the IT-projects. Method: To attain the purpose with our study we have chosen a qualitative method. We have carried out interviews with two of the project managers of the IT-project of the two large companies.Result: A couple of problems occurred within the IT-projects of the large companies.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..